P160CarryingCaseAssemblyInstructions
1. Locate the handle and the base
assembly. Locate the handle
assembly slots which are in the
middle of the base assembly.
With the SNAP LOCKS on the
handle facing the sonar unit
pedestal, align each side of the
handle with the handle assembly
slots, slowly press the handle
down into the slots until the
handlelocks.THISASSEMBLYIS
NOT MADE TO BE TAKEN APART
ONCETHEHANDLEASSEMBLYIS
LOCKEDINTOTHEBASE.
2. Mount the sonar gimbal bracket
totheunitpedestal.Lineupthe
holes in your bracket with the
mounting slots on each end of
thepedestal.Usethefourplasticfastenerstosecureitintoplace.
3. Setthebatteryintothebatterycompartmentsection.Pushthebattery
totheinsideofthiscompartmenttowardthehandle.Placethefoam
insert next to the battery. With a standard size lead acid or gel cell
batterythefoamwillgiveasnugfitandkeepthebatteryfrommoving
around.Theareabehindwillbeleftopenandcanbeusedforstorage.
4. Attach your unit to the gimbal bracket and set the Ice Ducer into the
holeinthefoaminsert.Donotpushthetransducersofarintothehole
thatitcontactsthebaseasthiswillcausescratchingofthetransducer
face. Connect the unit to the battery and the IceDucer to the unit.
Wrap excess cable around the unit pedestal and secure in place with
cabletiesifnecessary.
5. OPTIONAL If you do not want to use the floatprovided with the Ice
Duceryoucanusethesuppliedtransducersupportinstead.Thispiece
slidesintotheverticalslotsoneithersideofthebaseassembly.Itcan
beinstalledmanydifferentwaysto fityourrequiredpositionbest. To
supportthetransducersimplepassthecordthroughtheopeninginthe
hole and lower the transducer letting the stop rest in the hole. Try to
keep the transducer away from the side of the ice hole as this can
effecttheconeangle.
6. OPTIONAL If youwantto mount our BatteryStatusIndicatorto your
case, there are predrilled holesandfastenersprovided. With the unit
facing you, locate the three holes on the right side of the handle, the
two smaller holes are for mounting the indicator and the larger hole
between is for passing the wires through to the battery. Do not leave
theindicatorconnectedtothebatteryforstorage.
Comments to this Manuals